Why Is Thermal Management Challenging in HPLC Systems? | SANYO DENKI San Ace 9RA Cooling Fan Case Study

High-Performance Liquid Chromatography (HPLC) systems are widely used in medical and analytical laboratories for the separation, identification, and quantitative analysis of chemical components in biological samples.
Due to their high analytical accuracy and long operating hours, HPLC instruments place extremely strict requirements on thermal stability, acoustic performance, and long-term reliability.

In practice, thermal design is often one of the most critical challenges during the development of new HPLC systems. This article introduces a real application case to explain how the SANYO DENKI San Ace 9RA (140 ×140x 38 mm) DC cooling fan helped optimize thermal performance while reducing noise and simplifying system design.

Thermal Challenges in HPLC Instruments

Compared with general industrial equipment, HPLC systems present several unique cooling challenges:

• Concentrated heat sources: control boards and power modules operate continuously under load

• Noise sensitivity: laboratories and medical environments demand low acoustic levels

• High reliability requirements: long operating cycles with minimal maintenance

• Tight development schedules: limited time for repeated thermal testing

In this case, the customer’s new HPLC model initially used three 80 × 25 mm fans from another manufacturer to cool the control board.
However, during evaluation, the system exhibited excessive noise and a complex airflow structure that limited further optimization.

Application Overview

Brand: San Ace (SANYO DENKI)
Industry: Medical
Equipment: High-Performance Liquid Chromatography (HPLC) system
Cooling target: Control board

Adopted model: San Ace 9RA (140×140x38 mm)
Estimated demand: Approx. 2,000 units per year

Key Issues Faced by the Customer

1. High noise level caused by multiple small fans
   The combined operation of three 80 mm fans resulted in unacceptable acoustic performance.

2. Limited development time
   The project required fast evaluation without extended trial-and-error cycles.

3. Need for quantitative thermal validation
   Design decisions needed to be supported by airflow and temperature analysis.

Solution: From Fan Quantity to System Efficiency

Thermal Fluid Simulation Support

SANYO DENKI provided thermal and airflow simulation (CFD) services to analyze heat distribution and airflow paths inside the HPLC enclosure.
This made it possible to identify airflow bottlenecks and optimize fan selection based on data rather than assumptions.

Fan Configuration Optimization

A single San Ace 9RA 140 × 38 mm fan was proposed to replace the original three-fan configuration.
Thanks to its high airflow and static pressure capability, the 9RA achieved equivalent—or better—cooling performance with a simpler structure.

Immediate Sample Availability

Evaluation samples were supplied immediately from the local laboratory, allowing the customer to conduct real-machine testing without delaying the development schedule.

Advantages of SANYO DENKI San Ace 9RA (140 × 140x 38 mm)

The San Ace 9RA series is designed for applications requiring high reliability and stable airflow, offering the following features:

• Fan size: 140 mm × 38 mm

• Sensor type: Pulse sensor

• Expected lifetime:

  • 40,000 hours at 60 °C

  • 70,000 hours at 40 °C

• PWM speed control support for intelligent thermal management

• Multiple voltage and speed variants to meet different system requirements

SANYO DENKI?San Ace 9RA Series Model Lineup (140 × 140x 38 mm)

The San Ace 9RA series includes multiple voltage and performance options, covering 12 V, 24 V, and 48 V designs, with airflow levels up to 212 CFM and static pressure up to 160 Pa.
This flexibility allows engineers to balance cooling performance, noise level, and power consumption according to application needs.

Reasons for Adoption

• Proven thermal simulation and engineering support

• Reduced fan count with improved acoustic performance

• Fast sample delivery suitable for tight project schedules

• Long service life aligned with medical-grade reliability requirements

Conclusion

Thermal design in HPLC systems is not simply about increasing airflow.
It requires a careful balance between cooling efficiency, noise reduction, reliability, and system simplicity.

This application case demonstrates how the SANYO DENKI San Ace 9RA (140 × 38 mm) cooling fan enabled a more efficient and quieter thermal solution, supporting the stable operation of medical analytical equipment under demanding conditions.

臺灣jamicon風扇、San Ace山洋散熱風扇，AVC風扇，jentech風扇